Yvf2 (225~355) Series Variable Frequency Adjustable Speed Three Phase Asynchronous Motor

Model NO.
variable frequency adjustable speed motor
Structure and Working Principle
Brushless
Type
Z4
Certification
ISO9001, CCC
Brand
Semc
Trademark
SEMC
Transport Package
Plywood
Specification
international standard
Origin
China
HS Code
8501320000
We often persist with the theory "Quality To start with, Prestige Supreme". We are fully committed to delivering our clientele with competitively priced good quality items, prompt delivery and experienced support for Yvf2 (225~355) Series Variable Frequency Adjustable Speed Three Phase Asynchronous Motor, The product will supply to all over the world, such as: Slovak Republic, Iran, Johannesburg, We integrate design, manufacture and export together with more than 100 skillful workers, strict quality controlling system and experienced technology.We keep long term business relationships with wholesaler and distributors form more than 50 countries, such as USA, UK, Canada, Europe and Africa etc.
Shanghai Electric Heavy Machinery Co., Ltd. Diamond / Audited Supplier

Product Description:

        This series motor has the advantages of similar products at home and abroad, wide speed range, small vibration and low noise. The motor adopts squirrel cage structure, which is reliable in operation and convenient in maintenance. Moreover, the installation size and power level are in accordance with IEC standard. It is consistent with the corresponding Y2 series motors and has strong interchangeability and versatility. An independent cooling fan is installed to ensure that the motor has good cooling effect at different speeds. This series of motors output constant torque at 5 (3) ~ 50Hz and output constant power at 50 ~ 100Hz.
 

Product Name YVF2 (225~355) series variable frequency adjustable speed three phase asynchronous motor
Motor Type DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(Electric machinery)
Operating speed  Constant Speed /Low Speed /Adjust Speed /High Speed Other 
Rated voltage: 380V,660V,690V
Rated power 250~900KW
Reference frequency 50Hz
Cooling mode IC411
Insulation class F
Protection level IP54 or IP55
Altitude no more than 1000 meters
Connection 3kW and below for Y connection, 4kW and above for delta connection.
Basic structure forms B3, B5, B35, B14, B34
Application YVF2 series motors are suitable for driving rolling, lifting, transportation, machine tools, printing and dyeing, papermaking, chemical industry, textile, pharmaceutical and other mechanical equipment requiring continuous and frequent positive and negative inversion, and can be used in conjunction with various frequency conversion power supply at home and abroad.
Maintenance method Professional motor maintenance center motor maintenance process: cleaning stator and rotor – replacing carbon brush or other parts – vacuum F pressure dipping paint – drying – Calibration balance.
1. Use environment should be always dry, motor surface should be kept clean, air intake should not be hindered by dust, fibers and other obstacles.
2. When the thermal protection of the motor continues to operate, it should be ascertained whether the fault comes from the motor or the overload or the setting value of the protective device is too low. After eliminating the fault, it can be put into operation.
3, ensure that the motor is well lubricated during operation. The general motor runs for about 5000 hours, that is to say, lubricating grease should be added or replaced. When bearing overheating or lubricating deterioration is found in operation, the hydraulic pressure should change lubricating grease in time. When replacing grease, the old grease should be removed, and the oil groove of bearing and bearing cover should be washed with gasoline. Then ZL-3 lithium grease should be filled with 1/2 (2 poles) and 2/3 (4 poles, 6 poles and 8 poles) of the cavity between the inner and outer rings of the bearing.
4. When the life of the bearing is over, the vibration and noise of the motor will increase obviously. When the radial clearance of the bearing reaches the following value, the bearing should be replaced.
5, when removing the motor, it is OK to remove the rotor from the shaft extension or the non extension end. If it is not necessary to unload the fan, it is more convenient to take out the rotor from the non-axle extension end. When pulling out the rotor from the stator, the stator winding or insulation should be prevented from being damaged.
6. When replacing the windings, the form, size, turns and gauges of the original windings must be recorded. When these data are lost, they should be obtained from the manufacturer and the original designed windings should be changed at will, which often deteriorates one or several performance of the motor or even makes it impossible to use them.