Steel Laboratory Furniture with accessories
The size can be custom-made requested by customers.
1. Material for upright frame: Its made of 60X40X2.0mm steel pipe by welding, its
with epoxy resin powder after acid-washing and phosphorization.
2. Connection wing: solid plastic parts or welded steel part on Z-frame itself, it
depends on customers requirement.
3. Adjustable feet: Using M10 screws(treated by galvanization) with adjustable
height not less than 10mm.
A. Worktop: The worktop is based on the requirement of customers. Its made of
16mm phenolic resin/S.S/Epoxy resin/Cermaic worktop. The edge of worktop will
be treated specially to ensure its safety for human body.
B. Cabinet: The cabinet is made of high quality 1.0/1.2mm cold rolled sheet with
different thickness as per its different loading weight. The surface is treated by acid
washing,hosphorization before coating by epoxy resin powder. The products are
produced by precise CNC machine. All the welding points have been polished
specially which will not hurt the hand. The inside cabinet is with front and back
upright columns and reinforcing ribs to increase the bearing capacity and impact
resistance capacity.The inside cabinet is equipped with adjustable setting for
C. Door and drawer: The door is with double layer made of 1.0/1.2mm BAOGANG
cold rolled sheet. We can fill the sound insulation material into the inside space
between two layers if its required by customer. The drawer is shaped once made
of bending cold rolled sheets. Its with excellent bearing capacity for the support of
D. Handle: Stainless steel U-type handle or long handle shaped once made of
E. Movable back panel: Movable and free dissembling structure which is
convenient for checking water, electricity and gas pipe etc.
F. Movable layer: Its with reinforcing rib inside to increase its bearing capacity
to avoid deforming. It can be dissembled freely and the height can be adjusted.
G. Hinge: Using durable 304 stainless steel hinge which can be used for long
H. Drawer sliding rail: Using 3-joints bearing drawer rail with noise reduction,
it can ensure the full opening for the drawer with good bearing capacity and
3D design for customers by free of charge:
Installation: The installation procedures are designed to be very simple. It
can be finished perfectly only by using a screw knife. We can furnish CAD
installation drawing and installation guidance for your reference.