Mini Bluetooth RGB LED Light Controller with APP Control

Model NO.
VGD-MB-RGB
Supply Voltage
DC12-24V
Output
3 Channels
Output Current
<4A/CH
Output Power
12V <144W ; 24V<288W
Static Power Consumption
<1W
Working Temperature
-20°c - 60°c
Net Weight
45g
Trademark
VIGEN
Specification
53mm*24mm*11mm
Origin
Shenzhen, China
HS Code
8537101990
To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for Mini Bluetooth RGB LED Light Controller with APP Control, The product will supply to all over the world, such as: Danish, Sheffield, Sacramento, Our organization. Situated inside the national civilized cities, the visitors is very easy, unique geographical and economic situations. We pursue a "people-oriented, meticulous manufacturing, brainstorm, construct brilliant" organization. hilosophy. Strict top quality management, fantastic service, reasonable cost in Myanmar is our stand on the premise of competition. If vital, welcome to make contact with us by our web page or telephone consultation, we are going to be pleased to serve you.
Vigenstar Intelligent Technology Co., Limited Diamond / Audited Supplier

1.Parameter of mini bluetooth LED RGB controller
 
Model  VGD-MB-RGB ;
Supply Voltage DC12-24V ;
Output 3 channels ;
Output Current <4A/CH ;
Output Power 12V<144W , 24V <288W
Static Power Consumption <1W ;
Connection Mode Common Anode ;
Working Temperature -20ºC-60ºC
Controller Size 53*24*11mm(L*W*H);
Net Weight 45g
Control Mode APP Control

2.The description of products

This Bluetooth RGB  Controller is a universal controller via ios & Android device. Bluetooth 4.0 and the most advanced PWM (pulse width modulation) control technology have been adopted. 3 channels(Common anode) RGB led lighting like Led strips light, LED module, LED light box can be suitable with it. Easy to install and use, memory function, indicate light show are the advantages of it.  Modes selection, brightness & speed adjustment and more are the nice functions. Dynamic mode like jump, fade or strobe, do it as you wish.
 

3. Controller connection 

(1) It is necessary to ensure that the red arrow of the controller corresponds to the black arrow at the device end, otherwise the device will have a short circuit.

(2) The connection between the controller and the power supply.

(3) Controller connection guidance

 

4.App Installation

Open QR Software then scan the below QR Code, then download & install it for free.

Please contact us for detailed operation instructions

5.Attentions
1. Please use the product in a dry environment.
2. Please use the input voltage at 12-24V DC voltage, must not connect into 220V AC directly.
3. The product is requested common anode connection. The wrong connection
will cause a malfunction.

FAQ
1. Why the controller didnt appear in the Bluetooth list of phone setting?  
     In order to ensure that the controller cannot be connected by others, Bluetooth    
     controller wont appear in the setting list. Just open the APP with Bluetooth  
     enabled and the controller will show up.

2. Why the controllers didnt appear in the app after I opened the phone Bluetooth?
      In order to ensure the privacy of the controller, the controller needs to be   
      successfully connected with the phone within one minute after powering on. If  
     more than one minute, please restart your controller.
3. How to reset your device?
     If you experience any issues with your smart device, try following the steps
     below to reset your devices and then add them back into your app.

     Power the device off (8 seconds)
     Power the device on (12 second)
     Power the device off (8 seconds)
     Power the device on (12 second)
     Power the device off (8 seconds)
     Power the device on (1 2second)

     Power the device off (8 seconds)
     Power the device on (8~12 second)
     Power the device off (8 seconds)
     Power the device on (8~12 second)
     Power the device off (8 seconds)

    Power the device on. If the light flashes 3 times and then change to bright up and
    fade gradually mode, it has been successfully reset.
Note:
     1). Once you reset your devices, they will no longer appear in your app and will
     need to be added again.
     2). Make sure to perform the factory reset by switching on the power supply of the decvice instead of the APP.
4. Can multiple users control the same set of smart devices?
     Yes. You and other people you share control with can log into the app on multiple
     devices and control the same set of smart devices.
5. Can I log into the app on multiple devices?
     Yes, you can install the app and log in using the same account on multiple
     devices.