IPG Raycus Max Metal Parts Fiber Laser Engraving Marking Machine(Model: PEDB-400D)
Fiber Laser Engraving Marking Machine Introduction
The laser etching machine for metal adopts international most advanced technology and the fiber laser sources lifetime can reach 100,000 hours, 8-10 years without any consumables and maintenance.
This laser etching machine for metal with PC for metal is the best choice for the customers who have special requirements to the smallest & finest laser beam and character. The software has already been installed and the parameter is settled before delivery. Once recieved, the laser etcher could work directly without data adjustment.
Fiber Laser Engraving Marking Machine Features
1.Best Marking Effect: the laser beam of fiber laser etching machine for metal is fine and thin. Laser etching steel can provide the best marking effect among all the laser machines. Especially good at smallest character marking, such as mark on IC chip.
2.Deep Marking: Perfect Laser fiber laser etching machine can make deep marking up to 1.0mm on stainless steel and aluminum. While YAG and Diode marking only could mark 0.2mm-0.3mm.
3.Higher Accuracy: The laser etching machine for metal can reach unto 0.001mm precision, while diode only 0.01mm.
4.10 Years Long lifetime: fiber laser etching machine use the fiber laser source made by Germany IPG technology, the lifetime can reach 100,000 hours, so the machine can be used for 8-10 years.
5. No consumables:The laser etching machine for metal can be used for metal marking for 8-10 years without any consumables.
6.No need to adjust the laser path.
7.Free of Maintenance.
8.Use Integrated Air Cooling.
9.Low Power Consumption: low cost, only 0.5kw/hour.
10. Small and compact: the volume of Perfect Lasers fiber laser marking machine is small, only 0.15 M3.
Fiber Laser Engraving Marking Machine Technical Data
|PEDB-400D Floor type
||MAX, Raycus, Mapo and IPG
||110*110mm/ 175*175mm /200*200mm
|Output power adjustment range
|Nominal average output power W
|Central emission wavelength
|Emission Bandwidth (FWHM)
||< 10 nm
|Long-term average power instability
|Pulse width, (FWHM)
|Laser switching ON time
||180 μ sec
|Laser switching OFF time
||180 μ sec
|Pulse Repetition Rate* kHz
|Energy per pulse (PRR = 20 kHz)
|Typical beam quality, M2
|Output fiber delivery length
|Max. Power consumption
Fiber Laser Engraving Marking Machine DetailsPerfect Lasers high quality fiber laser marking machine adopts international most advanced technology and the laser source is fiber with USA IPG technology, lifetime can reach 100,000 hours, 8-10 years without any consumables and maintenance. The diode coupling with fiber to process pump, the pump light will course the particles reverse which can emit high quality laser beam. This is the best choice for the customers who have special requirements to the smallest & finest laser beam and character.
Compact: The high-tech product, which is combined of laser device, computer, auto controller and precision machinery. It is small design and the complete weight is 160 kgs.
High Precision: Re-position precision is 0.002mm
High Speed: Imported scanning system makes the scanning speed is up to 7000mm/s
Easily Operating: Afford the specific marking software based on Windows, which is real-time adjust the laser power and pulse frequency. You can input and output by computer according to edit in the both of the specific marking software and the graphic software such as AutoCAD, CorelDRAW or Photoshop.
High Reliability: MTBF>100,000 hours
Energy Saving: The efficiency of optic-electrical converting is up to 70%
Low Running Cost: No wearing part. Free maintaining, no need to adjust the laser path.
1> All of our machine will be full-checked by our quality control department before the shipment. We make sure that customers will be get good products from us. and all of our machine with a12 months quality guarantee period.
2> We will enclose an “Instruction Book”, “Operation Manual” and “Training Video” (in English version) to you, which is easily understood and handle by the customer.
3> We will offer plenty of online supports, by email, video, telephone and fax.
4> Our engineer can make a door-to-door instruction training service.
Address: HengRuiChuangZhi Technology Park,No 13, YangQiaoHu Road,
Jiangxia District, Optical Village, Wuhan, Hubei Province,P.R.China
Cell: 0086 18107234499 (Ms.Emliy) Tel: 0086 27 86791986