| Full downdraught spray booth E606 | ||
|
Size (L x W x H) |
Inside Size | 6900 x 4000 x 2800mm |
| Outside Size | 7010 x 5570 x 3810mm | |
| Foundation and Floor | Foundation | Full metal foundation, full grids, grids capacity: 700KG/wheel |
| Metal Basement | 350mm height, the ventilation effect is better than traditional spray booth | |
| Drive-in Ramps | 3 units, each size: 2000x1000mm, diamond plate construction | |
| Wall and Door | Wallboard | Adopt high quality double construction fireproof insulation rock wool panel, thickness: 50mm |
| Roof Panel | Adopt high quality double construction fireproof insulation rock wool panel, thickness: 50mm | |
| Entrance Door | Door with steel frame, 1 set, size: 3100 x 2700mm (W x H), tempering glass observation window | |
| Personnel Door | 1 set, size: 800 x 2000mm (W x H),tempering glass observation window, with automatic door closers | |
| Hanging system | Ceiling with hanging system, it can hang the spray gun or object, hanging system with wheel, can move 3 meters | |
| Light System | Ceiling Lighting | 8 units, each 4 x 16w, adopt LED energy saving light, tempering glass |
| Side Lighting | 8 units, each 2 x 16w, adopt LED energy saving light, tempering glass | |
| Brightness | ≥1000 LUX | |
| Filtration System | Pre-filters | EU3 grade pocket filter, filter effect is much better |
| Ceiling Filters | Adopt high efficient adhesive filter, which can capture the dust who is more than 4μm, its filtering rate reaches 98% |
| Bottom filter | Fibreglass paint-stop filter |
| Exhaust Filters | Fibreglass paint-stop filter and active carbon filter |
| Ventilation System | Inlet Fan | Adopt big impeller turbo fan 1 x 7.5KW , Three-phase, 6 pole motor, 380V, 970RPM, 50HZ (SIEMENS motor as option) |
| Outlet Fan | Adopt big impeller turbo fan 1 x 7.5KW , Three-phase, 6 pole motor, 380V, 970RPM, 50HZ (SIEMENS motor as option) | |
| Total Fan Capacity | 25,000m³/h | |
| Air Flow Speed in Cabin | 0.25-0.35m/s in loaded booth | |
|
Painting and Baking Exchange System |
Solenoid valve+ pressure adjustment control cylinder driven damper exchange | |
| Air flow adjust | Manual air damper to adjust to pressure of booth | |
| Manometer | Yes, to indicate the pressure of booth | |
| Duct | Straight pipe: 9.8 meters, bending pipe: 3 units, reducing pipe: 3 units, soft connection: 1 unit, rain hat: 1 unit, flange connection | |
| Flue | Galvanized pipe: 4 meters, bending pipe: 2 units (stainless steel pipe as option) | |
| Heating System | Heating Exchanger | Adopt high efficient heat-resistant (SUS304) stainless steel as cycling heat exchanger |
| Burner Model |
Adopt 1 set RIELLO diesel burner G20, each heating capacity 180.000kcal/h (gas burner or infrared light heater as option) |
|
| Heating Time | 4-6 minutes (from 20 to 60ºС) under baking status, max baking temperature is 80°C | |
| Control Box | Control System | Standard control system |
| PLC control | Adopt SIEMENS PLC control | |
| Touch screen control | Adopt SIEMENS touch screen | |
| Function | Painting, warm painting, baking, lighting, emergency stop switch, baking time setting, temperature setting, over-temperature alarm indication, baking delay stop protection, temperature limiter , burner error alarm, motor error alarm | |
| Total Power | 16KW | |
| Option voltage | Three-phase 208/220/240/380/400/415/440/480V, 50/60Hz |
Company information:
HC Coating Equipment Manufacturing Co., Ltd. is an auto maintenance equipment company. Today it is a global player in the automotive aftermarket providing a full range of equipment and service solutions for workshops. The core products in our company are spray painting and baking booth, portable spray booth, bus/truck spray paint booth, preparation station, mixing room, brake lathe, car bench and lifts. All our products are shipped to Europe, East Europe, North & South America, Africa, Australia and Asia as well as different provinces in China.Our company is accredited to the internationally recognized quality standards of CE, ISO9001:2008.
Workshop:
Packaging & Shipping
Our certificate:
FAQ:
1.Are you a factory or a trading company?
we are a factory and all machines are produced at our own factory.
2.How long is the production?
Within 10 working days after receiving deposit.
3.What is the main product?
spray booth,,Auto body collision system, car repair machine, car lift,disc aligner and etc.
4.Whats the warranty time?
One years with good after-sale service
5.I dont know how to assemble your spray booth?
The complex installation is already finished before delivery, what you need to
do is finishing the simple procedures according to the installation instructions.
6:Where is your factory located? How can I visit there?
Our factory is located in Huadu District, Guangzhou City, Guangdong Province, China, about 20 minutes by car from Baiyun international Airport. We welcome customers from all over the world!
7:When the product can be delivered?
Commonly the lead time will be within 5-7 working days after receiving 30% deposit by T/T.
| Name: | Zoe |
| hc_spraybooth | |