Breast Relever Pump Feeding Use Manual Breast Pump with Bottle

Model NO.
BP-17
OEM
Available
Shape
Manual Model Breast Pump
Temperature Range
Resistance to -40°c-250°c
Product Package
OPP Bag, Color Box, Blister Card
Trademark
KINGSUN/OEM
Transport Package
Cartons
Specification
Suitable for Wide Neck Bottle
Origin
Guangzhou
HS Code
3924100000
Normally customer-oriented, and it's our ultimate concentrate on for being not only one of the most dependable, trustable and honest supplier, but also the partner for our shoppers for Breast Relever Pump Feeding Use Manual Breast Pump with Bottle, The product will supply to all over the world, such as: Colombia, Durban, Estonia, Our items are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Kingsun Baby Products Co., Ltd. Diamond / Audited Supplier

Manual Breast Pump With Suction Ball

1. Breast Pump is suitble for that baby cannot directly suck the breast milk or something wrong with moms nipple.
2. Its natural attraction and release functionality design can imitate babys sucking motion and tempo so that relief the distending pain of breast.
3. The suction can be freedom adjusted according to your need.
4. Manual breast pump made of imported food materials. safe & non-toxic, use safely.
5. Lightweight design is portable and discreet.Textured massage cushion helps pulling nipple out.
6. Compact, lightweight design of the pump body makes it easy to hold and position on your breast.
7. Cambered shape of the nozzle, more effective, more seals close to breast, do not leak when use the breast pump.
8. Storage bottle of breast milk pump can store breast milk alone, and do not worry about the milk sucked out inconvenient to handle.

Products Details

Item No BP-17
Name Manual Breast Pump
Product Weight 135g per set 
Material Silicone+PP
Color Customerized
Heat-resistance Silicone-50~200°C; PP:-20~120°C
BPA Bpa Free
Packing Blister card,color box 
Delivery Sample 7 days, production goods about 20 days

Product Show

Use instruction step

1. Clean your hands, clean and boil to sterilize 3-5minutes of the parts, suction ball and connecting pipe before use
2. Match the bottle body into the breast cover,then connect the silicone pipe and suction ball to the rear end of breast pump cover.As picture showing:

3. Wipe the nipple with clean gauze and warm water.
4. Cover the breast with the pump and lean slightly. Hold the bottle in one hand and squeeze the silicone rubber ball in the other hand. The negative pressure can be adjusted by squeezing ball times.
5. When finish suck, or the negative pressure is too high, then lightly press the breast pump and contact breast by hand to let the air in,then removed the breast pump.
6. After suck milk, take down the bottle and put on the nipple to feed directly or storage it in the refrigerator and re-feed when demand.

Warning:

1. Wash and boil and sterilize for 3-5 minutes before and after use. Long boiling or hard clean brush will damage the product. .(Generally, no disinfection is required for suction ball and pressure relief valves.)
2. When installing components, ensure the installation is correct(especially sealing rings)
3. If the mother has a disease in her breast, please talk to your doctor
4. Massaging breast before sucking or covering warm and wet towel, can promote breast milk secretion, more easy to suck.
5. Keep the breast pump and bottle vertical access when suck milk, to prevent leakage of milk
6. Put in the place where the baby is not in contact when not use.

Our Services

OEM service of breast pump or other series is very welcome. We will provide all the details to customers during the mass production. Customize mould according to your requirement and your requirements and complaints are highly respected. Necessary test and certification can be obtained as you request.

FAQ

1. Are you manufacturer or Trade Company?
We are OEM baby products factory . Our factory have more than 10 years history, we have rich experience in producing baby feeding bottle, baby cups, teethers, pacifier, breast pump etc.
 
2. Can I get samples for comfirmaion?
Yes,of course. we supply samples for free. The freight chare paid by customer .
  
3.How long will be the mold time?
Commonly is 30 days for breast milk pump. Send us your original breast pump or give us the design file, we can open new mold for you.
 
4. Can I have my own logo to design on the manual breast pump?
Yes, of course. we can do silk printing, hot stamping, applique sticker, Please provide us the PDF, AI file or picture. If you want the Logo on the breast pump,we can open  private mold  for you.
 
5. Can u give me your price list?
No problem, we are baby product manufacturer, and we have more than 3000 items, our baby items have different weight, different color,  artwork, decoration request. So please send me your detail request, then I will email you back the price.