6J13 resistance strip manganin

Model NO.
(6J13)
Trademark
TANKII
Transport Package
as Per Client′s Requirement
Specification
0.5mm, 0.6mm, 0.7mm etc
Origin
China
HS Code
74082900
We're going to dedicate ourselves to offering our esteemed shoppers with the most enthusiastically considerate solutions for 6J13 resistance strip manganin, The product will supply to all over the world, such as: Belarus, Curacao, Denver, It is our customers' satisfaction over our products and services that always inspires us to do better in this business. We build mutually beneficial relationship with our clients by giving them large selection of premium car parts at marked down prices. We offer wholesale prices on all our quality parts so you are guaranteed greater savings.
Shanghai Tankii Alloy Material Co., Ltd. Diamond / Audited Supplier
6J13 resistance strip manganin

 
CuNi alloy grade: Constantan, CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23, CuMu12Ni, CuNi34, CuNi40 (6J40), CuNi44. 
 
Manganin is the electric resistance alloy with the copper nickel as the essential component. It has the low resistance temperature coefficient, wide working temperature scope (500 below), good machining property,anti-corrosiveand easy braze welding. Used in manufacturing regenerators variable resistor and the strain resistor. 
 
Manganin common temperature classes are 130, 155, 180 C,200,220 
 
Manganin is a trademarked name for an alloy of typically 86% copper, 12% manganese, and 2% nickel. 
 

Name
 
Code
 
Main Composition (%)
Cu Mn Ni Fe
Manganin 6J8,6J12,6J13 Bal. 11.0~13.0 2.0~3.0 <0.5

 
 
Manganin Typical Chemistry:
 
86% copper, 12% manganese, and 2% nickel
 
Manganin Size Available:
 
a) Wire       φ8.00~0.02
b) Ribbon  t=2.90~0.05 w=40~0.4
c) Plate      1.0t×100w×800L
d) Foil         t=0.40~0.02 w=120~5

Mechanical Properties

Max Continuous Service Temp 0-100ºC
Resisivity at 20ºC 0.44±0.04ohm mm2/m
Density 8.4 g/cm3
Thermal Conductivity 40 KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC 0~40α×10-6/ºC
Melting Point 1450ºC
Tensile Strength(Hard) 585 Mpa(min)
Tensile Strength,N/mm2   Annealed,Soft 390-535
Elongation 6~15%
EMF vs Cu, μV/ºC (0~100ºC) 2(max)
Micrographic Structure austenite
Magnetic Property non
Hardness 200-260HB
Micrographic Structure Ferrite
Magnetic Property Magnetic

 
 

Resistance Alloy- Shunt Manganin Sizes / Temper Capabilities
Condition: Bright, Annealed, Soft 
Wire &Ribbon diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameter 1mm-30mm 
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm 
Also enameled condition is available